Results 1 to 12 of 12

Thread: Searching SentinelLM sdk 7.1.0 anybody any idea

  1. #1
    Sope
    Guest

    Searching SentinelLM sdk 7.1.0 anybody any idea

    Hi,

    Just wanted to ask where can i find SentinelLM Sdk 7.1.0
    I have a program which is protected by it.
    If anybody knows any url it would be a great help.

    hopeing for a reply.
    sope
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  2. #2
    Teach, Not Flame Kayaker's Avatar
    Join Date
    Oct 2000
    Posts
    4,124
    Blog Entries
    5
    Hi Sope,

    You've posted this exact same question at least 3 times on this MB in the past 10 days, twice here within 4 days, and once in the TOT forum.

    I've also seen your posts on the ID RevengeForum and uhmm, er, my email. Sounds like you're not having any luck

    I give you credit for persistence and making use of all your options, but please don't duplicate post on this forum, at least within such a short period of time. You're either going to get your answer or you're not.

    In any case, what's wrong with the sdk versions other than 7.1.0 available at CrackZ site?

    Kayaker

  3. #3
    Sope
    Guest
    Hi Kayaker
    Thanks for your pt. I won't duplicate the things next time
    ... sorry for inconvenience to all.

    Regards
    sope
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  4. #4
    Teach, Not Flame Kayaker's Avatar
    Join Date
    Oct 2000
    Posts
    4,124
    Blog Entries
    5
    Not a problem Sope, just trying to maintain order and keep things reasonably clean

    I noticed the links to the sdk's at CrackZ site seem to be working OK. I'm not real familiar with the SentinelLM stuff, is there a big difference between the versions and is a specific version of the sdk needed to work on SentinelLM?

    Regards,
    Kayaker

  5. #5
    Sope
    Guest
    Hi Kayaker

    > I noticed the links to the sdk's at CrackZ site

    A bit of lame question on my part but i
    don't see the link which you are mentioning.
    I could get the SentinelLM Programmers Guide
    which i am currently reading.

    Can i get the exact url of it ?

    I searched CrackZ site but i did not find
    SentinelLM sdk link anywhere.
    Must have overlooked on the site.

    Regards
    Sope
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  6. #6
    Teach, Not Flame Kayaker's Avatar
    Join Date
    Oct 2000
    Posts
    4,124
    Blog Entries
    5
    Reverse the What's New section

  7. #7
    Sope
    Guest
    Thanks for the Hint
    Regards
    Sope
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  8. #8
    tom324
    Guest
    Hi,

    I have found only FlexLM no SentinelLM.
    Did I miss something?

    Tom
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  9. #9
    Sope
    Guest
    Hi

    Same problem here. Did not see any link yet. Almost searched
    the whole site. Hint also doesn't seems to give enough clue.
    I guess its not there.

    I also search www.rainbow.com full site not available
    Also read the FAQ & the last question says you need to
    contact rainbow for sdk. I guess they know
    about CyberHeg Tuts...

    Regards
    Sope!
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  10. #10
    Teach, Not Flame Kayaker's Avatar
    Join Date
    Oct 2000
    Posts
    4,124
    Blog Entries
    5
    Oh Crap

    FlexLM != SentinelLM

    Shows you how much I know about that stuff

    I guess I wasn't paying enough attention to what I was seeing, I thought the FlexLM sdk's were what you needed. Back to square one. Sorry about misleading you guys.

    Kayaker

  11. #11
    Hiya,

    Since I've conversed with everyone on this thread at some point and even related to SentinelLM I'll post here instead of digging out e-mail addresses (no doubt long lost).

    I had intended to upload the SentinelLM SDK to my site a week or so back (curse me guys if it was longer than that). A combination of passwords changing and crap u/l speeds has convinced me I just can't suffer the u/l and I'm not sure +Tsehp will appreciate 80Mb d/l's at a time, I looked at 'ripping' the SDK somewhat but even a basic rip of the programs and so on comes in at a hefty 25Mb's+.

    Any suggestions/solutions appreciated, until then I guess its going to have to be sourced elsewhere, unless +Tsehp takes the server hits and I suffer the agony of watching my modem choke for an evening or 2 ;-).

    Regards

    CrackZ.

  12. #12
    Bratscher
    Guest
    Hi CrackZ, and others in the thread.

    I am one of the people that pestered you (and Cyberheg, and NolanBlender)about the mysterious Sentinel LM SDK. t'was 6 months ago or so, so I am learning to survive without it .

    I am for sure not an Authority in klebbing the web, but I have tried to find th SDK package quite unsuccessfully.

    CyberHeg told me that it is just not available, because it is not a free sample.

    If CrackZ could hint us on how he got his copy, would be helpful.
    I see few alternatives to a long u/l and d/ls, what would be somewhat abusive to CrackZ and his host. What about a Snail-mail chain of burned CDs and/or Zip disks?
    I promise that I have read the FAQ and tried to use the Search to answer my question.

Similar Threads

  1. Searching commands
    By Bilal in forum OllyDbg Support Forums
    Replies: 4
    Last Post: July 17th, 2004, 03:02
  2. Searching Games
    By Woodmann in forum The Newbie Forum
    Replies: 15
    Last Post: June 5th, 2003, 17:59
  3. Searching for SentinelLM 7.0 SDK
    By Sope in forum Tools of Our Trade (TOT) Messageboard
    Replies: 0
    Last Post: July 13th, 2001, 13:22
  4. Searching for breakpoint(s)
    By bobik in forum Malware Analysis and Unpacking Forum
    Replies: 1
    Last Post: July 5th, 2001, 01:27
  5. Searching 4 ??
    By Critter in forum Malware Analysis and Unpacking Forum
    Replies: 2
    Last Post: March 12th, 2001, 09:47

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •