Results 1 to 11 of 11

Thread: how to unpacking manual?

  1. #1
    tHE SnaKe
    Guest

    Unhappy how to unpacking manual?

    please how to unpacking manual?
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  2. #2
    nofurs
    Guest
    YOUR POST WILL BE DELETE!!!!!!!!!
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  3. #3

    How to unpack: A sortie...

    Here's the unpacking method that works best:

    1. Find a table

    2. Put the packed box on it

    3. Analyze what its packed with: PAPER? THREAD? RIBBON?

    4. Decide on using appropriate tools: HANDS? KNIFE? SISSCORS?

    5. Note down each step so that you do not have to RETRACE the whole process again.

    6. After initial round of UNPACKING is done, you can RIP THE WRAPPER apart, Cut it or simply slice through it.

    7. Open box, enjoy goodies.


    Dear LORD!!!!

    But seriously Snake, but seriously!!

    Do the following:

    1. Read the FAQ.
    2. Find a site that TEACHES about unpacking
    3. FInd a packer
    4. Pack notepad
    5. Get tools from net to unpack
    6. Try unpacking the packed notepad with that tool (so many tuts also support the same method)
    7. You're done (In case you have problems, ask here)
    8. But before asksing, make sure you TELL us the following:

    (a) The tools you have used
    (b) the application you are using
    (c) The method/approach to the problem
    (d) The locations where YOU think the protections are, or the unpacking code is
    (e) Some patching (raw/inmem) that you have tried

    After all this, if you have any questions ask us. This may seem a little too much to ask for, but compare this with going to a doctor.

    Snake: Cure me! Cure me! Cure me!
    Doc: Sure, but what's the problem?
    Snake: Cure me! Cure me! Cure me!
    Doc: Yeah! But tell me the symptoms, the areas of pain, your feelings..
    Snake: Cure me! Cure me! Cure me! Cure me! Cure me! Cure me!

    ...you get the idea.

    If you do not do the above, more enthusiastic volunteers like CLUESURF will reply the way they did, and you will get discouraged pretty soon.

    MADE EFFORT, WILL ASSIST!!

    ...Have Phun
    Blame Microsoft, get l337 !!

  4. #4
    Ni2
    Guest

    cure me! cure me! heheheh

    Hi Aimless,

    Very funny your post and the analogy with the doctor I think you are right 100% in what you say.

    My little advice to the Snake to learn manual unpacking is the following: "Just take something that is packed and trace it from the beginning and you'll see all the "magic" inside "the unpacking" and all your questions about unpacking will be answered by yourself " Believe me, no needed for an unpacking course, etc...just you and the debugger.

    Regards,
    Ni2
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  5. #5
    tHE SnaKe
    Guest

    thanks ni2 about help me

    i search any tutorials for the unpacking manual?
    give any web page for the tutorials
    thanks
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  6. #6
    Risotto
    Guest
    Hey!

    At least look at the bottom or try to use search engine, etc.

    Go on.
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  7. #7
    We know English is not your first language, but if you want to participate in English language forums you need to understand certain basic information in English. One of the things you need to understand is the rules of the forum. One of the rules here is that you are supposed to use your brain and eyes and do some work on your own before you post a request

    If you had done any looking and any thinking about unpacking you would have discovered that there are several links at the bottom of the forums which will take you to sites with many many tutorials on many many subjects for you to study. I would suggest that you try Krobar's site and read up as much as you can on unpacking. It is a subject you will need much background reading on before you are ready for manual unpacking. This is not the place to ask someone to take your hand and teach you every thing from step one on any subject.

    Those here will help you when you show you have made an effort on your own, what you have done, and where you are having trouble after trying it on your own. Study, try, and then come back and ask question about specific issure.

    Regards.
    JMI

  8. #8
    Mefeus
    Guest

    Give a hand!

    Well, i also laughed a lot about the "unpacking"-Tutorial, that u give to Snake, but please don't forget:
    This is a Newbie-Forum, so you have to assume even Newbie-questions.

    Don't leave anybody alone in this magic world. Give him a headbang and a handshake and at least a good help on his way!

    So, if the originator of this thread r looking for tutorials in different languages then english, look here:

    http://www.crackstore.com/

    Ok, ok - it's well known, but for me it was a good point to start from.

    Peace, Mefeus
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  9. #9
    ReaL|sTy
    Guest
    that's right newbies need help insted of critical answers,, when someone is beggining is really hard to learn hard enought if you don't know anything about programing stuff......

    this could help you.....
    Attached Files Attached Files
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  10. #10
    dipeshrestha
    Guest
    ReaL|sTy that's right newbies need help insted of critical answers,, when someone is beggining is really hard to learn hard enought if you don't know anything about programing stuff......

    I too agree with ReaL|sTy. newbies can also send their queries in this section. The veteran cracker should not harass by saying that YOUR POST WILL BE DELETED.


    dipeshrestha
    I promise that I have read the FAQ and tried to use the Search to answer my question.

  11. #11
    nofurs
    Guest
    well he doesn't respect the board WHY SHOULD I REPECT HIM!!!!!!!!!!
    critical anwsers yeah I always give critical answers to those never READ THE POSTING GUIDLINES AND POST GARBAGE IN HERE This is not the first time he had done that!
    BTW DON'T UPLOAD FILES CAN BE FOUND IN THE WEB coz the limits of space in here!

    >>The veteran cracker
    I'm not that old hahahaha

    Giving too much to a newbie or l33to turns them a lamer
    I promise that I have read the FAQ and tried to use the Search to answer my question.

Similar Threads

  1. manual unpacking.. and i mean manual :)
    By Kr0n0 in forum Malware Analysis and Unpacking Forum
    Replies: 5
    Last Post: August 20th, 2002, 14:40
  2. Help with manual unpacking!!
    By NeO in forum Malware Analysis and Unpacking Forum
    Replies: 2
    Last Post: February 13th, 2001, 15:32
  3. Help with manual unpacking!!
    By NeO in forum Advanced Reversing and Programming
    Replies: 2
    Last Post: February 13th, 2001, 06:40
  4. Where to find tut for manual unpacking Of Pecrypt 1.02 Or how do you do it!
    By NeO'X'QuiCk in forum Malware Analysis and Unpacking Forum
    Replies: 2
    Last Post: January 27th, 2001, 22:14

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •