Page 3 of 3 FirstFirst 123
Results 31 to 33 of 33

Thread: Old Flora Asic USB Hardlock ... unable to emulate

  1. #31
    Found another oddity ...
    I found a 1,44MB floppy of the original application ... it had alladin diagnostixv1.0 on it.

    When I connect to module address 15615 (is also mentioned in the application manual) I receive the following in HaspLoger:

    DIAGNOSTIX log:
    ==================================================================
    2012/04/18 14:09:14.919 <== Application: diagnostix.exe
    2012/04/18 14:09:14.919 <== HardLock_Login: ModAd = 0x3CFF (15615)
    2012/04/18 14:09:14.966 ==> HardLock_Login: P1 = 42, P2 = 00, P3 = 00
    2012/04/18 14:09:14.966 ==> HardLock_Login: Status = 0x00
    ==================================================================
    2012/04/18 14:09:15.029 <== Application: diagnostix.exe
    2012/04/18 14:09:15.029 <== HardLock_IsHardlock: ModAd = 0x3CFF (15615)
    2012/04/18 14:09:15.091 ==> HardLock_IsHardlock: P1 = 42, P2 = 00, P3 = 00
    2012/04/18 14:09:15.091 ==> HardLock_IsHardlock: Status = 0x00
    ==================================================================
    2012/04/18 14:09:15.154 <== Application: diagnostix.exe
    2012/04/18 14:09:15.154 <== HardLock_ID: ModAd = 0xE3CFF (933119)
    2012/04/18 14:09:15.216 ==> HardLock_ID: P1 = 42, P2 = 00, P3 = 00
    2012/04/18 14:09:15.216 ==> HardLock_ID: ID = 0x42
    2012/04/18 14:09:15.216 ==> HardLock_ID: Status = 0x00
    ==================================================================
    2012/04/18 14:09:15.279 <== Application: diagnostix.exe
    2012/04/18 14:09:15.279 <== HardLock_ReadBlock: Adress = 0x42, Length = 0x40 (WORD)
    2012/04/18 14:09:15.341 ==> HardLock_ReadBlock: Data =
    2012/04/18 14:09:15.341
    4D 5A 00 44 | 4C 6F 47 20 | 47 6D 62 48 | 2C 20 4F 6C [MZ.DLoG GmbH, Ol]
    63 68 69 6E | 67 00 30 00 | 53 74 6F 72 | 6B 65 20 4E [ching.0.Storke N]
    6F 6C 74 65 | 20 45 4D 54 | 00 00 00 00 | 00 00 00 00 [olte EMT........]
    00 00 00 00 | 00 00 00 00 | 00 00 00 00 | 00 00 00 00 [................]
    00 00 00 00 | 00 00 00 00 | 00 00 00 00 | 00 00 00 00 [................]
    00 00 0F DE | B1 00 00 00 | 00 08 00 00 | 16 00 31 4C [..............1L]
    00 00 FA 00 | 00 00 00 00 | 01 40 00 80 | 00 00 00 00 [.........@......]
    00 00 30 14 | 81 E1 00 00 | 00 00 00 00 | 3A 41 ED D7 [..0.........:A..]
    2012/04/18 14:09:15.341 ==> HardLock_ReadBlock: Status = 0x00
    ==================================================================
    2012/04/18 14:09:15.404 <== Application: diagnostix.exe
    2012/04/18 14:09:15.404 <== HardLock_Logout: ModAd = 0x134D3CFF (323828991)
    2012/04/18 14:09:15.466 ==> HardLock_Logout: P1 = 42, P2 = 00, P3 = 00
    2012/04/18 14:09:15.466 ==> HardLock_Logout: Status = 0x00


    And when I run the original application Hasploger gives me the following...
    QDSRV32 log:
    ==================================================================
    2012/04/18 13:10:11.125 <== Application: QDSRV32.EXE
    2012/04/18 13:10:11.125 <== HardLock_Login: ModAd = 0x46B1 (18097)
    2012/04/18 13:10:11.184 ==> HardLock_Login: P1 = 00, P2 = 00, P3 = 00
    2012/04/18 13:10:11.184 ==> HardLock_Login: Status = 0x07
    ==================================================================
    2012/04/18 13:10:11.242 <== Application: QDSRV32.EXE
    2012/04/18 13:10:11.242 <== HardLock_Login: ModAd = 0x46B1 (18097)
    2012/04/18 13:10:11.942 ==> HardLock_Login: P1 = 00, P2 = 00, P3 = 00
    2012/04/18 13:10:11.942 ==> HardLock_Login: Status = 0x07
    ==================================================================
    2012/04/18 13:10:12.000 <== Application: QDSRV32.EXE
    2012/04/18 13:10:12.000 <== HardLock_Login: ModAd = 0x3CFF (15615)
    2012/04/18 13:10:12.059 ==> HardLock_Login: P1 = 00, P2 = 00, P3 = 00
    2012/04/18 13:10:12.088 ==> HardLock_Login: Status = 0x07
    ==================================================================
    2012/04/18 13:10:12.117 <== Application: QDSRV32.EXE
    2012/04/18 13:10:12.117 <== HardLock_Login: ModAd = 0x3CFF (15615)
    2012/04/18 13:10:12.700 ==> HardLock_Login: P1 = 00, P2 = 00, P3 = 00
    2012/04/18 13:10:12.700 ==> HardLock_Login: Status = 0x07
    ==================================================================

  2. #32
    Founder FoxB's Avatar
    Join Date
    Mar 2002
    Location
    Earth
    Posts
    450
    mk not hold network func of the hardlock

  3. #33
    The previous post was application running in local(usb) hardlock mode...

Similar Threads

  1. trying to emulate a harlock E-Y-E dongle
    By 2c077 in forum The Newbie Forum
    Replies: 1
    Last Post: April 6th, 2012, 04:47
  2. wibu emulate
    By asteri in forum The Newbie Forum
    Replies: 6
    Last Post: November 10th, 2006, 10:27
  3. How to emulate single step execution?
    By luocong in forum Plugins (General)
    Replies: 1
    Last Post: September 2nd, 2004, 08:57
  4. Problem to emulate SproQuery
    By nasty in forum Advanced Reversing and Programming
    Replies: 3
    Last Post: June 1st, 2004, 09:52
  5. Does someone knows how to emulate CreateRemoteThread on win9x ?
    By tsehp in forum Advanced Reversing and Programming
    Replies: 20
    Last Post: December 27th, 2000, 16:22

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •