PDA

View Full Version : I'm noob too help me please :'( hasp


ftoprince
December 24th, 2013, 18:04
I have program with usb hasp dongle.(i guess its hasp envelope) Program only works it's first installed pc. When i install another computer it doesn't work with original dongle. I attached dongle driver. I have no idea which dongle it's hasp or hasp envelope. Don't know how to unpack, dump and emulate. Help will be greatly appereciated. I'm noob in this field. Advice me tools. Thanks pros.

FoxB
December 24th, 2013, 23:36
you have SparKey dongle, not hasp

VID_01b4 & PID_0f1f = "SparK Usb Key "

try to make log with the usb trace and post here (if want upload the setup installer also). may be any1 can help you...

Make log with USBTrace . Simple manual:

1) Download USBTrace
2) Setup and register USBTrace
3) Run USBTrace
4) Press button with label "Capture hot plugged USB devices"
5) Press button with green arrow
6) Insert dongle to USB
7) Press button with red square
8) Save log to file
9) In top left corner (in USBTrace) select your
USB device and check it
10) Press button with green arrow
11) Run your program and work with her
12) Press button with red square
13) Save utl log to file
14) Convert utl log file to txt logfile and seve it
15) Upload utl- and txt-file to any share folder

GalakTozawr
December 25th, 2013, 12:23
In Ukraine use hammer in usb port. No usb - no problem =) i`m sorry, Not program - not problem. Use disassembler)

FoxB
December 25th, 2013, 12:41
Quote:
[Originally Posted by GalakTozawr;95906]In Ukraine use hammer in usb port.


wow, hard people's in exUSSR =)

GalakTozawr
December 25th, 2013, 14:11
Our USB flash drive:2873
Size: 23terrabaytese
You name "Chelabinskaya" =)

FoxB
December 26th, 2013, 08:46
the space delivery to "Chelabinsk"?!