PDA

View Full Version : Crypkey 7.1


NEODIG
April 16th, 2012, 20:35
hola

I am trying to unlock software application with c r y p k e y protection 7.1. I think it must been done before but it making my life misery over the last months. The vendor make it awkward for freelancers to operate without paying an uncomprehendable amount of Euro to them for a one man show. Buy the License and about once or twice a year the crappy Cr yp Key goes awal and puts me behind a deadline by weeks due to the difficulty and cost to renew through the application venders. I want a personal quick bedroom resolve.

I have played with the CKInfo and got myself a user key hash(seed) and a user key hash and then have xor 'ed them together applied them to the application but it thwarts my every effort.

the application ships with a serial number which allocates the operational use of the product (which i presume I follow when creating the Key with CkInfo.exe. is this correct?

The 2 keys I have are generated from a good pair of key and code but when I update the application it adopts none of the serial number accolades and wont play ball with daddy.
every time I fail it site code changes . My latest is produces a hex 0x3BCE and from a decent site key i get 0x7628
please if I appear in over my head deep tell me so and I will come back in a month with a better idea of what I am trying to do


I use CKinfo 1.4

beers

Jake

FoxB
April 17th, 2012, 03:04
you got master/user key from target?

NEODIG
April 17th, 2012, 03:10
do you mean by extracting it from the exe or the like using the ollybog tool? No. I read somwhere that if I had a good pair (code and key) i could create a key from those.

so for example use Ckinfo to interpreet the

sitecode gets me the hash key seed (the sitecode I used was the requested one I am trying to generate)
Sitekey (from a good pair) gets me the hash key. Then I understood that i could xor them and that value would be a suitable donor for the ckinfo.

FoxB
April 17th, 2012, 09:09
you can share your target software?

janjan
July 8th, 2012, 12:47
Please, HELP!!!
I downloaded the new version of an application, it is a program to design 3D bodies.
In the past, I manages to apply the correct key to it's older version using ckinfo and the script I added below.
However, the new version is using a new version (7.6) i think, of cryptkey and when i try to enter the sitecode in the appropriate place I always get the following error:

Decrypt Failed - Trying v6.00 Decryption...
Error #16: Error occurred decrypting the Site Code - Encryption Keys Not Found


This prevents me from getting the Encryption key

The application I am trying to get the key for can be downloaded from:


<Commercial Software link deleted - Read the FAQ>

The old script i used (with the older version of this application is:
#Default Script (ckInfo)
Action=CreateSiteKey
AddToExistingLicence=no
EasyLicence=no
KeyLevel=0
LicenceDuration=unlimited
NumberOfLicences=1
NetworkLicence=no
UserKeyHash=0x6CA7
SiteCode=<enter site code here>
KeyOptions=1,9,10,11,12



I tried with ckinfo 1.14 and i always get the above errors.
I even tried to dump the crp32002 file and i THINK i got some relevant combination at the end of it but i have no idea what to do with it.

Please HELP.

FoxB
July 8th, 2012, 16:57
show site code

janjan
July 8th, 2012, 23:31
an example NEW site code is:
8F82 32C5 6E90 8089 CE

an example of an OLD site code is:
C6AF BE0F 324D 0A6B 07
i say example because i installed it on a virtual machine until i know how to get the real code.
once i do i will install on an actual machine so if you could, and it is not too complex, please tell me how to get the code.

Thank you

janjan
July 10th, 2012, 11:40
Quote:
[Originally Posted by FoxB;92857]show site code

i placed the Site Code...any success?

FoxB
July 10th, 2012, 13:55
i have pair of real/fucke site code for my PC. but cant transform from fucke to real

janjan
July 10th, 2012, 14:21
Quote:
[Originally Posted by FoxB;92887]i have pair of real/fucke site code for my PC. but cant transform from fucke to real


Do you mean the side code i get in the registration for is a fake or decrypted one?

FoxB
July 10th, 2012, 14:32
target software show obfuscated site code

janjan
July 10th, 2012, 15:23
Quote:
[Originally Posted by FoxB;92890]target software show obfuscated site code


do you mean they are encrypting the site code?
i came across this link:
http://www.reteam.org/board/printthread.php?t=1868&page=31&pp=10
It talks about decrypting the site code (if it is encrypted) from withing the dump crp32002 file.
I tried it but could not get the proper data from the dump crp32002 file.

Do you think you'll be able to get the key?

FoxB
July 21st, 2012, 13:35
sure, im able to get the key for my pc

janjan
July 21st, 2012, 16:00
Could you please help me get the key for my PC, or in this case, ANY PC?

newbie
August 4th, 2012, 16:47
how to deobfuscate sitecode

janjan
August 5th, 2012, 11:45
FoxB, you mentioned you manged to get the code. Please help us too....

FoxB
August 5th, 2012, 11:54
show us your experiments about getting clear sitecode before...

janjan
August 5th, 2012, 12:33
Quote:
[Originally Posted by FoxB;93015]show us your experiments about getting clear sitecode before...

what exactly do you mean?
I installed the demo version and got the sitecode which i stated at the beginning of this post.
However, as you wrote, this was an obfuscate code.
this is why the ckinfo script did not work.
You said you manged to extract the real sitecode out of the obfuscate one.
So what else can i show you that will help you tell us how to get the real sitecode

FoxB
August 5th, 2012, 20:24
you make nothing for research this way...

janjan
August 6th, 2012, 12:15
I'm not looking to research i just need the sitecode...

FoxB
April 16th, 2013, 08:31
@janjan:

Parsing Code - 8F82 32C5 6E90 8089 CE
Decrypting Code - 0002 4CA2 1107 2DA1 A7 [0x17:0x02]
Code Validation - OK
Formatting Code :
02 4C A211 072D A1A7
╚╣ ╚╣ ╠══╝ ╠══╝ ╠══╝
║ ║ ║ ║ ╚═══════════════ Code CRC - 0xA1A7
Allow Add Licence? - No ═══╣ ║ ║ ╠════════ User Key Hash (Seed) - 0x2D07
Allow Easy Licence? - Yes ═╝ ║ ║ ╚══════════ Drive Serial Number - 11527
CrypKey Libraries - v7.6 ═════╝ ╠═ Account Number - 418
╠═ Application Id - 4
╚═ Company Number - 7956418

sreeks
April 27th, 2013, 00:22
@FoxB
Kindly request you to help me in finding sitekey for the below.


Sitecode:
74D7 4462 2F6C 9CC7 35

Userkey:
D60263DDA4D1865A8C76449D60

Masterkey: 24c82fbe84e3d3ddf7b50adcf761ff64a3dc5187ae922af5e878021c4d8a069db35953e40a834ef98d0396f195280d7089e2 b9d2315fc3026130066d0795ef5979105a502e5a5ed50bf8eef3e8bd556dc8bdf40d2b28770a2fb6b6871f4a004c83b372c2 810de3bf6790e58245256db3d3741f9ac519d50b7f31188fe273fbf5

FoxB
April 27th, 2013, 04:07
CrypKey Copy Protection Information v1.xx

Parsing Code - 74D7 4462 2F6C 9CC7 35
Decrypting Code - 0002 4D37 19EE 523E 19 [0x0F:0x18]
Code Validation - OK
Formatting Code :
02 4D 3719 EE52 3E19
╚╣ ╚╣ ╠══╝ ╠══╝ ╠══╝
║ ║ ║ ║ ╚═══════════════ Code CRC - 0x3E19
Allow Add Licence? - No ═══╣ ║ ║ ╠════════ User Key Hash (Seed) - 0x52EE
Allow Easy Licence? - Yes ═╝ ║ ║ ╚══════════ Drive Serial Number - 21230
CrypKey Libraries - v7.7 ═════╝ ╠═ Account Number - 311
╠═ Application Id - 6
╚═ Company Number - 7956311


Key Information...
+ Site Code : 74D7 4462 2F6C 9CC7 35
+ User Key Hash (2) : 0xEB9A
+ Easy Licence? : Yes
+ Key Level : 0
+ Key Options : 1-16

Key Validation - OK
Creating Key - 0000 0174 B900 00FF FF00 0025 4C
Encrypting Key - 923E 0D84 AA16 5D2F 6BFB 5BEF 66


but i'm dont known key level and key option

janjan
April 27th, 2013, 05:22
can you tell me how to get those myself?
How do i use the ckinnfo with the new crypkey 7.6?

sreeks
April 27th, 2013, 09:05
Hi FoxB,

Thank you very much for the support and quick turnaround.

However, this is what I did to proceed:

Unsuccessful Step:
1. Entered MANUAL in License Serial Number
2. Entered 923E 0D84 AA16 5D2F 6BFB 5BEF 66 in Site Key
The application would not proceed further

Successful Step:
1. Entered 00 0174 B900 00FF FF00 0025 4C in License Serial Number
2. Entered 923E 0D84 AA16 5D2F 6BFB 5BEF 66 in Site Key

The application closed by itself and when opened again the application was in "Hung mode" with an message stating "Registration Error".

Since I was unable to use the application, remembering one of the posts, I deleted the Crypkey Folder:
C:\Users\All Users\CrypKey\Licenses\D0A23343EE9C9D0F

Then when I reopened the application, the sitecode is completely new and different. I am terribly sorry that your effort on the earlier Sitecode went in vain.

Would it be feasible if you could help me out to resolve this riddle, this time I would not take steps without prior consent so that effort put is not wasted. I also would like to know if you require me to verify combinations of Key Levels and Key Options.

Information noticed for your reference:
1. User key and Masterkey are exactly the same
2. The folder crypkey is installed exactly in the same "C:\Users\All Users\CrypKey\Licenses\D0A23343EE9C9D0F"
3. However Sitecode is changed

The new sitecode is:
Sitecode: 5C3D 309D 6C27 1DAA DD
UserKey: D60263DDA4D1865A8C76449D60
Masterkey:
24c82fbe84e3d3ddf7b50adcf761ff64a3dc5187ae922af5e878021c4d8a069db35953e40a834ef98d0396f195280d7089e2 b9d2315fc3026130066d0795ef5979105a502e5a5ed50bf8eef3e8bd556dc8bdf40d2b28770a2fb6b6871f4a004c83b372c2 810de3bf6790e58245256db3d3741f9ac519d50b7f31188fe273fbf5

For verifying purpose and for your reference please include the below:
KeyLevel=7
KeyOptions=3

Thank you very much for your time and look forward to hear inputs from your end for further resolution.
Await for your reply.

Best Regards,
Sri

FoxB
April 27th, 2013, 11:29
Key Information...
+ Site Code : 5C3D 309D 6C27 1DAA DD
+ User Key Hash (2) : 0xEB9A
+ Easy Licence? : Yes
+ Key Level : 7
+ Key Options : 3

Key Validation - OK
Creating Key - 0000 0174 B907 0000 2000 0025 15
Encrypting Key - AB0E 3B69 E09C A825 4C93 74EC 26

sreeks
April 27th, 2013, 15:40
Hi FoxB,

:-(
The application is accepting the sitekey however it is going in demo mode.
Any further suggestions, kindly let me know.
I would like to give one last try hence kindly request you to help me generate sitekey for the below:

NewSite Code:
647B 1E47 07E2 5FC3 A5


Best Regards,
Sri

FoxB
April 28th, 2013, 09:21
Parsing Code - 647B 1E47 07E2 5FC3 A5
Decrypting Code - 0002 4D37 1922 4A6B 13 [0x06:0x0B]
Code Validation - OK
Formatting Code :
02 4D 3719 224A 6B13
╚╣ ╚╣ ╠══╝ ╠══╝ ╠══╝
║ ║ ║ ║ ╚═══════════════ Code CRC - 0x6B13
Allow Add Licence? - No ═══╣ ║ ║ ╠════════ User Key Hash (Seed) - 0x4A22
Allow Easy Licence? - Yes ═╝ ║ ║ ╚══════════ Drive Serial Number - 18978
CrypKey Libraries - v7.7 ═════╝ ╠═ Account Number - 311
╠═ Application Id - 6
╚═ Company Number - 7956311

sreeks
April 28th, 2013, 09:42
Hi FoxB,

Can you post the below:
+ Key Level : 7
+ Key Options : 3

Creating Key-
Encrypting Key-

Best Regards,
Sri

FoxB
April 28th, 2013, 09:52
Key Information...
+ Site Code : 647B 1E47 07E2 5FC3 A5
+ User Key Hash (2) : 0xEB9A
+ Easy Licence? : Yes
+ Key Level : 7
+ Key Options : 3

Key Validation - OK
Creating Key - 0000 01B8 A107 0000 2000 00B1 11
Encrypting Key - DCCE 6EFF 19CF 9B51 F8AA 6821 F7 this is SiteKey

sreeks
April 28th, 2013, 10:38
Hi FoxB,

The license is correct and is accepted by the system. Hurray :-)

However I noticed two things:
1. The main page still says "NOTE: THIS IS A DEMONSTRATION VERSION OF THE PRODUCT."
2. Once you navigate to Help --> About --> The remaining days is 0 Days.

New SiteCode:
2982 6B63 495C BB57 28

Best Regards,
Sri

FoxB
April 28th, 2013, 11:08
You need ONLY SITE KEY
F10D 84A0 AA08 C57A 14DE D1FF 9B

sreeks
April 28th, 2013, 11:10
Hi FoxB,

We would need both of the below:
Creating Key-
Encrypting Key-

Regards,
Sri

sreeks
April 28th, 2013, 11:27
Hi FoxB,

I checked it several times by following the below Step:
Input:
License Number: MANUAL
SiteKey: F10D 84A0 AA08 C57A 14DE D1FF 9B
Output:
The application does not go forward

I used the below and got the below message:
Input:
ckinfo /sitekey F10D 84A0 AA08 C57A 14DE D1FF 9B
Output:
Decrypt Failed - Trying v6.00 Decryption...
Error #17: Error occurred decrypting the Site Key - Encryption Keys Not Found

Also I am bit worried in the process of checking and testing if I have to remove the folder a new site code will appear and then I will have to share it with you again.


New SiteCode:
2982 6B63 495C BB57 28
I need both of the below for the above sitecode:
1. Creating Key-
2. Encrypting Key-


Warm Regards,
Sri

FoxB
April 28th, 2013, 13:51
tell me valid pair for the key level/key option. you use old KeyLevel=7 KeyOptions=3

sreeks
April 28th, 2013, 14:00
Hi FoxB,

I have a good news and a bad news.

Good News
What I did is for the Sitekey: F10D 84A0 AA08 C57A 14DE D1FF 9B you generated just recently, I used the license from older keys which you generated which is available in page-2. Bingo the application took the license file.

Bad News
Now the application took the values and is valid only till 1 day. When I closed the application and reopened again it was in demo mode.

Now the site code is as below:
Sitecode:
014E CF6E 294B F8CB 40

Can you generate the keys with the below options, hopefully it should work:
AddToExistingLicence=no
NumberOfLicences=1
NetworkLicence=no
EasyLicence=no
LicenceDuration=unlimited
NumberOfDays=365
KeyLevel=7
KeyOptions=3

The old pair of KeyLevel=7 KeyOptions=3 works just fine.

I need both of the below for the above sitecode:
1. Creating Key-
2. Encrypting Key-

YOU ROCK LIKE A HURRICANE :-)

Await for your reply.

Best Regards,
Sri

sreeks
April 28th, 2013, 15:31
Hi FoxB,

Back to square one :-(
Request you to generate as per the above post and should check it out whether it works fine.
Sitecode:
014E CF6E 294B F8CB 40

Regards,
Sri

FoxB
April 28th, 2013, 23:38
Parsing Key - F10D 84A0 AA08 C57A 14DE D1FF 9B
Decrypting Key - 0000 01B8 2107 0000 200A 8037 D9 [0x00:0x00]
Key Validation - OK
Formatting Key :
00 00 01 B821 07000020 0A80 37D9
╠╝ ╚╝ ╚╣ ╠══╝ ╠══════╝ ╠══╝ ╠══╝
╚═══╗ ║ ║ ║ ║ ╚══════════ Key CRC - 0x37D9
Add To Licence? - No ═══╝ ║ ║ ║ ╚════ Limited Licence (Days) - 10
Number Of Licences - 1 ════╣ ║ ╠══ Key Level - 7
Network Licence? - No ═════╝ ║ ╚══ Key Options - 3
Easy Licence? - No ══════════╩═══════ User Key Hash - 0x21B8

sreeks
April 29th, 2013, 22:38
Hi FoxB,

I need sitekey for the below Sitecode:
014E CF6E 294B F8CB 40

1. Creating Key-
2. Encrypting Key-

The above which you have given is not valid now..

Regards,
Sri

sreeks
April 30th, 2013, 17:06
:-(

sreeks
May 5th, 2013, 13:12
Hi FoxB,

I did not get a chance to look at the application even for some time since in the process of testing, the Sitecode changed.
Kindly request you to generate sitekey for the sitecode and should get back to you for further talks.

014E CF6E 294B F8CB 40

Best Regards,
Sri